Vancouver. Rather than Calgary. Connected to Calgary

 

Vancouver. Rather than Calgary. Connected to Calgary 

Undisclosed. Potential option connected to Calgary, Moncton & Toronto 

SuperCell Calgary. Weather

https://www.theweathernetwork.com/en/news/weather/severe/photos-supercell-hits-calgary-area-with-hail-torrential-rains

PEMBERTON OR SIMILAR 2 OR SO HOURS NORTH OF VANCOUVER PORTS

Accerage limitations then construction 

SEVENTY FIVE ACRES SQUARE FOOTAGE

On 75 acres, the maximum square footage for a structure is theoretically unlimited, as long as it stays within the property boundaries and complies with local zoning regulations. However, a more practical answer depends on factors like zoning laws, lot coverage restrictions, and the specific layout desired. 

Here's a breakdown:

• Acreage:

One acre is 43,560 square feet. Therefore, 75 acres is 75 * 43,560 = 3,267,000 square feet. Given one story otherwise doubling then if 2-3+ story ceilings

• Building Size:

There's no inherent limit to the square footage of a building based on acreage alone, as long as the structure stays within the property lines. 

• Factors Affecting Buildability:

• Zoning: Local zoning regulations will dictate the maximum footprint, height, and other characteristics of buildings. These vary greatly by location. 

• Lot Coverage: Zoning may also specify the percentage of the lot that can be covered by buildings (lot coverage). 

• Setbacks: Zoning typically requires buildings to be set back a certain distance from property lines. 

• Terrain: The shape and grade of the land will also affect how much space can be used for a building. 

• Access and Utilities: The location of driveways, septic systems (if applicable), and utility connections will also influence the buildable area. 

• Example:

If zoning allowed for 10% lot coverage and no setbacks were required, you could theoretically build a 326,700 square foot structure (10% of 3,267,000) on the 75 acres. However, this is highly unlikely and would likely require variances and special permits. 

In conclusion, while 75 acres provides ample space, the actual buildable square footage is determined by local regulations and the specific characteristics of the land. 

COMPARING RAW MATERIAL SOURCING 

Looking at comparisons 

TOROTO VERSUS CALGARY 

Toronto and Calgary both offer unique advantages for raw material sourcing, but their strengths differ. Toronto benefits from its central location and established supply chains, while Calgary boasts lower costs and access to resources in Western Canada. The best choice depends on specific needs, including the type of raw materials, budget, and desired level of access to suppliers.

Toronto:

• Established Market:

Toronto is a major economic hub with well-developed infrastructure and a large number of suppliers and distributors. This can translate to easier access to a wider variety of raw materials and established logistical networks.

• Accessibility:

Toronto's central location makes it relatively accessible for both domestic and international suppliers.

• Potential for Higher Costs:

Due to its status as a major metropolitan area, Toronto may experience higher costs for raw materials and industrial space compared to Calgary. 

Calgary:

• Lower Costs:

Calgary offers a more affordable industrial market with lower operating costs and potentially lower prices for raw materials. 

• Access to Western Resources:

Calgary provides access to resources from Western Canada, including minerals and other raw materials from the Canadian Shield and other mining regions. 

• Industrial Space Availability:

Calgary has a more available and affordable industrial space market compared to Toronto, which is experiencing very low vacancy rates. 

• Transportation Network:

Calgary has a strong transportation network, making it easier to distribute materials throughout Western Canada and beyond. 

Considerations:

• Type of Raw Materials:

The specific raw materials needed will heavily influence the best sourcing location. Calgary's strength lies in resources like minerals and metals, while Toronto may offer more diverse options for other materials. 

• Budget:

Calgary's lower cost of living and industrial space can make it a more budget-friendly option for some businesses. 

• Specific Needs:

Consider the required level of access to suppliers, logistical needs, and proximity to end-users when deciding between Toronto and Calgary. 


VANCOUVER & TORONTO 

Vancouver and Toronto offer distinct advantages for raw material sourcing. Vancouver, with its proximity to the Pacific Rim and Canada's largest port, is ideal for sourcing from Asia and other Pacific nations. Toronto, as a major industrial hub in central Canada, provides better access to domestic resources and a larger market for distribution within the country. The best location depends on the specific materials needed and the target market. 

Vancouver's Strengths:

• Pacific Rim Access:

Vancouver's port is a major gateway for goods coming from Asia, making it a strategic location for sourcing raw materials from countries like China, Japan, and South Korea. 

• Natural Resources:

British Columbia, where Vancouver is located, has significant natural resources, including forestry and mining, which can be a source of raw materials. 

• Lower Demand for Certain Materials:

While Vancouver has less overall demand than Toronto, this could translate to lower prices for some less common raw materials. 

Toronto's Strengths:

• Central Location:

Toronto's location in central Canada makes it well-positioned for distributing raw materials throughout the country. 

• Industrial Hub:

Toronto is a major industrial center, with a large manufacturing base that requires various raw materials. 

• Domestic Resources:

Toronto and Ontario have access to a variety of domestic natural resources, including mining and agriculture, according to Statista. 

• Greater Demand:

Toronto's larger population and economic activity create a higher demand for raw materials, potentially leading to more established supply chains. 

Considerations:

• Specific Materials:

The type of raw material is crucial. If sourcing from Asia, Vancouver is likely better. If sourcing from Canada's interior, Toronto might offer better access. 

• Supply Chain:

Consider the established supply chains for specific materials. Toronto may have stronger domestic supply chains, while Vancouver has strong links to the Pacific Rim. 

• Cost:

While Vancouver might have lower demand for some materials, larger markets like Toronto can offer better prices for more common materials. 

• Logistics:

Shipping and transportation costs will vary depending on the origin and destination of the materials. 


TORONTO VERSUS HALIFAX 

Toronto generally offers a wider range of raw material sourcing options due to its larger industrial base and proximity to diverse Ontario resources, while Halifax provides access to specific Atlantic Canadian resources like minerals and forestry products. Choosing between the two depends on the specific materials needed and the scale of operations. 

Toronto's Strengths:

• Centralized Location:

Toronto's location in Southern Ontario provides access to resources from the Canadian Shield (minerals, forestry) and the fertile agricultural lands. 

• Established Manufacturing Hub:

As a major industrial center, Toronto has a well-developed network of suppliers and logistics for various raw materials. 

• Diverse Material Options:

Southern Ontario's geological diversity means a broader range of raw materials are available compared to Halifax. 

• Proximity to Automotive and Other Industries:

Toronto's strong automotive industry and other manufacturing sectors create demand and supply chains for various materials. 

Halifax's Strengths:

• Access to Atlantic Canadian Resources:

Halifax provides access to Nova Scotia's mineral resources (gypsum, salt, some gold) and forestry products. 

• Maritime Hub:

Halifax's port facilitates international trade and may offer unique sourcing opportunities. 

• Specific Industry Needs:

For businesses focused on Atlantic Canadian resources, Halifax is a natural hub. 

• Potential for Niche Markets:

The Atlantic provinces may offer unique sourcing opportunities for specific materials not as readily available elsewhere. 

Considerations for Sourcing:

• Specific Material Needs:

The type of raw material is crucial. For example, if you need potash, you'll be looking at Western Canada rather than Ontario or the Maritimes. 

• Scale of Operations:

Large-scale operations might benefit from Toronto's established supply chains, while smaller, specialized businesses might find Halifax more suitable. 

• Transportation Costs:

Consider the cost of transporting raw materials from source to your location. 

• Environmental Regulations:

Regulations can vary by province and region, impacting sourcing. 

• Sustainability:

The sustainability of sourcing practices is becoming increasingly important. 

• Indigenous Reconciliation:

Canada's national strategy emphasizes reconciliation with Indigenous peoples in resource development. 

In summary: Toronto generally offers a wider range of raw materials and established supply chains, while Halifax provides access to specific Atlantic Canadian resources. The best choice depends on the specific raw materials needed, the scale of operations, and other factors. 

COLD CLIMATE PALMS UNDER -20

Palm trees have become a recognizable part of Vancouver's horticultural landscape, especially in the English Bay area, but whose idea was it to plant them around the city in the first place?

The trees – a hardy palm called the Trachycarpus fortunei or windmill palm – aren't native to the region but are found in China, Burma, and North India where they grow in cold climates. 

In fact, these sturdy trees are suited to survive below-freezing temperatures (as low as minus 20 degrees and up to 2,400 meters in elevation) as long as ice does not get into the crown of the palm, in which case the palm tree will die.

Since this rarely happens in Vancouver, the approximately 60 palm trees planted around the city continue to flourish, sometimes blooming green and yellow flowers.

So what are they doing here? 

The palm trees can be credited to Rudi Pinkowski, a palm enthusiast living in Vancouver. 

In the mid to late 80s he approached the Vancouver Board of Parks and Recreation with the idea to plant the hardy palms along Beach Avenue, the Park Board tells V.I.A.
"Originally there were only around 12 palms planted but they turned out to be so popular that more were added over the years," the Park Board adds

https://www.vancouverisawesome.com/local-news/vancouver-palm-trees-origin-idea-7126920

CIG